Made in Canada

Extreme Solid Safety Pool Cover with Drain

Name: Extreme Solid Safety Pool Cover with Drain
Brand: The Cover Guy
SKU: BYPOSAF-1224R-ENOS-BL-TCG
Price: 1049.99 CAD
Availability: InStock

$1,049.99

Combine solid coverage with practical drainage with The Cover Guy’s Extreme Solid Safety Pool Cover with Drain. Made in Canada, this cover helps block sunlight and keep leaves and debris out of your pool, while a built-in mesh drain panel allows rain and melting snow to pass through without the need of a pump. Reinforced construction and corrosion-resistant hardware deliver dependable off-season protection when properly installed and maintained.

Pool Size

Colour Blue Black

Step Configuration

No Steps

Center Steps

Before You Order: Double-Check Your Fit
Measure your pool's opening and check your step position to make sure everything lines up. A matching step style alone doesn't guarantee a perfect fit — sizing is what matters most.

Your cover will be made 12"-18" larger on each side than your pool opening, so there's no need to add that extra space to your measurements. Just make sure you have enough surrounding deck or concrete to accommodate that overhang.

Included Hardware
Standard stainless-steel springs, brass anchors, stainless steel buckles, an aluminum tamping tool, a hex key and an aluminum installation rod. Additional tools are required for installation. Alternative anchoring hardware may be required for your deck or pool layout.

Product Overview
Our Extreme Solid Safety Pool Cover with Drain brings together the protective coverage of a solid cover and the drainage convenience of a mesh panel. It’s a practical choice for homeowners who prefer solid coverage without relying on a pump for water removal.

The solid material helps block sunlight and keeps leaves, twigs and debris from entering through the covered areas. An integrated mesh drain panel provides a path for rain and melting snow to reach the pool below, helping reduce water accumulation on top of the cover.

Made in Canada with reinforced webbing, marine-grade polyester thread and corrosion-resistant hardware, this cover is designed for seasonal outdoor use. Proper strap tension and a clear drain panel are essential to drainage performance. Available in Black or Blue, with configurations for standard steps or pools without steps.

Solid Seasonal Coverage - The solid material helps block sunlight and keeps debris from passing through covered areas, supporting a cleaner pool during the off-season.
Built-In Drainage. No Pump Required - The integrated mesh drain panel allows rain and melting snow to pass through the solid cover, eliminating the need for a separate pump to remove standing water. That means one less piece of equipment to purchase, operate and maintain.
Reinforced for Outdoor Use - Reinforced webbing and marine-grade polyester stitching provide structure for seasonal coverage. Anti-rub strips help protect the cover and coping at contact points.
Made in Canada - Canadian manufacturing pairs durable construction with stainless steel springs and brass anchors for dependable seasonal use when properly installed and maintained.

Specification	Details
Construction	Solid cover with mesh drain panel
Manufacturing	Made in Canada
Drainage	Through the integrated mesh drain panel
Colours	Black and Blue
Step Size	Standard 4 ft. × 8 ft. steps
Installation	Professional installation strongly recommended

Installation & Fit
Professional installation is strongly recommended. The cover must conform to your pool’s shape and be correctly anchored, tensioned and overlapped. Confirm pool dimensions, step layout, deck type and any obstructions before ordering.
Pools with wood decks, pavers, limited deck space, raised walls or water features may require alternative hardware or a specially configured cover. Confirm requirements before purchase. Standard hardware is not suitable for every installation.

Care & Maintenance
Maintain the pool water level within 18 inches below the coping, as required by the manufacturer. Water beneath the cover helps support winter loads.

Inspect the cover and hardware at installation and throughout the season. Recheck tension two to three weeks after the initial installation and follow the manufacturer’s adjustment instructions.

Maintain appropriate pool water chemistry throughout the year. A cover does not replace routine water care.

For the Extreme Solid cover, keep the mesh drain panel clear and adjust strap tension as instructed. Check for standing water and correct drainage issues.

Avoid dragging the cover across rough surfaces. Use manufacturer-specified padding where required, and clean and store the cover according to the care instructions.

Important Safety Information
A safety cover is one part of pool safety and does not eliminate drowning risk. Stay off the cover and always supervise children. Remove the cover completely before using the pool. An unsecured or improperly secured cover is a hazard. Inspect regularly for damage and follow all manufacturer instructions. Failure to follow the instructions may result in injury or drowning.

Made in Canada Quality

Built in Canada to withstand real winters. No overseas shortcuts, just materials and stitching made to last.

More Less

Every seam is hand-stitched with commercial-grade thread built for UV and freeze-thaw resistance. Manufacturing domestically lets us control every spec, something outsourced overseas production can't guarantee.

Peace of mind all season long

A safety cover means you can enjoy your backyard in the off-season without worrying about what's underneath. It's one less thing to think about while you're out there.

More Less

Whether it's pets, guests, or just everyday use of the yard, a secure cover removes the water hazard from the equation entirely. That's the difference between managing a risk and not having one at all.

Built for Standard Steps. Or None at All.

Preset sizes are designed to fit standard 4' x 8' steps in one of several common configurations. Every color and cover type is also available in a no-steps option.

More Less

Choosing the configuration that matches your steps means a tighter, more accurate fit without custom measuring. If your pool has no steps, simply select the no-steps version in the same color and material.

No Pump Needed. No Pooling. No Problem.

A center mesh strip drains rain and melt through, so water never pools on top. No pump to buy, run, or maintain, unlike other solid covers.

More Less

Standing water adds weight most covers aren't built to hold, which is why competitors need a pump. Ours drains automatically, reducing stress on seams and anchors over time.

ASTM Certified. Safety You Can Trust.

Every cover meets ASTM F1346, the industry standard for pool safety covers. It's built and tested to keep your pool secure when it's not in use.

More Less

The standard sets requirements for load-bearing capacity, so certified covers must prove they hold real weight. It's safety that's been tested, not just claimed.

Out With the Leaves, In With the Clean

A tight weave keeps leaves, twigs, and debris out of your pool, not just people. Less debris means less cleanup and clearer water when you open for the season.

More Less

The mesh density is fine enough to stop even small debris while still letting rain and melt drain through. That balance keeps the cover from pooling water while still doing its job as a barrier.

Double Brass Hardware, Built to Last

High-quality brass hardware resists corrosion and holds up season after season. It keeps every connection secure without weakening over time.

More Less

Brass won't rust or seize the way lower-grade metal hardware can, even with repeated exposure to moisture. That means anchors and straps stay reliable, connection after connection, year after year.